NEMA Motors MAX-E2/841
Standard Features
- Meets or Exceeds IEEE 841 Standards - Note (1)
- Meets GM 7E-TA Specifications
- Meets IEEE 45 Marine Duty
- NEMA Premium Efficient
- Department of Energy Certificate # CC002A
- 60 Month Warranty from Date of Manufacture
- 60 HZ, 460 Volt Only
- 1.15 Service Factor - Continuous
- Class F Insulation with Phenolic Alkyd Resin Varnish - Two Dips and Bakes
- Class B Temperature Rise
- NEMA Design B Torques as a Minimum
- Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded
- Entrance - F1 Mounted. F2 Available - See EXTRAS/OPTIONS Below
- Designed for 40oC Ambient Temperature - Note (2)
- Designed for 3300 ft. Elevation - Note (2)
- CSA Certified for Class 1, Div. 2, Groups B, C, D Temp Code T3C, Non Sparking, Non Static Fan - Note (3)
- Bi-Directional Rotation
- Cast Iron Frame, End Brackets, Fan Cover and Main Conduit Box
- Dual Drilled Feet - Longer Frames (i.e. 145T Drilled also for 143T)
- 1045 Carbon Steel Shaft
- Aluminum Die Cast Squirrel Cage Rotor Construction
- Paint System: 2 Part Epoxy
- Paint Color: Blue - Munsell 5PB 3/8
- Double Shielded Bearings on Frames 140T-280T Pre-Packed with MULTEMP SRL Grease
- Vacuum De-Gassed Re-Greasable Bearings Frames 280TS-5808B with Polyrex EM Grease
- Automatic Grease Discharge on Frames on Re-Greasable Motors
- Grounding Terminal Inside Main Box with Provisions for Grounding on Frame.
- Stainless Steel Nameplate and Hardware
- Stainless Steel Automatic Breather Drain
- UL and CSA Approved for Inverter Duty per NEMA MG1 Part 31 - Note (4)
- Inverter Duty Magnet Wire Capable of Withstanding VoltageSpikes of up to 2200 Volts
- Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD. Non-Drive End Bearing is insulated only for 2-Pole motors 600 HP and larger.
- Speed Ranges: 20:1 VT,10:1CT
- 3 Leads Only
- Vibration Not to Exceed 0.08 Inches Per Second
- Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded
- INPRO TM Seals Installed on Both Ends
There are currently no drawings available for this product. Please check back soon.